This post is more than 5 years old
25 Posts
0
2005
Configuring VPlex VIAS
Hopefully a quick question.
Configuring VIAS in a VPlex Metro Configuration, the question is around the step where you register the Array Management Provider (AMP) on the VPlex GUI and using the document listed as a reference http://www.emc.com/collateral/white-paper/h13049-provisioning-emc-vplex-integration.pdf
So in a VPlex Metro where we have an AMP on each site, when it comes to registering the AMP do we register each AMP only on its own cluster or both on each cluster ?
So do we register AMP 1 on Cluster 1 and then register AMP 2 on Cluster 2 or register AMP 1/AMP 2 on both clusters together (so AMP1/AMP2 on cluster 1 & cluster 2).
From my understanding it would be the first option but i dont think its that clear.
Thanks
Darren
TadhgConcannon
1 Rookie
1 Rookie
•
22 Posts
0
April 20th, 2016 02:00
Hi Darren
You register the AMP only on its side of the cluster
For example
if you have a VNX in Site A and a VMAX in Site B
Then you would register the AMP for VNX in Site A only
Register the AMP for VMAX in Site B only
Example B
If you have a VNX and XtremIO in Site A and VMAX in site B
Then in Site A you would register one AMP for VNX, Then register an additional AMP for XtremIO in Site A
So 2 x AMP in Site A
Then in Site B you would register one AMP for VMAX
Hope this helps
Any other questions let me know
Kind Regards
Tadhg
darrenVCE
25 Posts
0
April 20th, 2016 02:00
Hi Tadg,
Thanks for reply, it was what i thought but good to get the confirmation.
Cheers
Darren