Unsolved
1 Rookie
•
85 Posts
0
1507
PowerMax VIAS provisioning with VPLEX
Hi all,
My customer just added a PowerMax 2000 to their infrastructure. VPLEX correctly sees the PowerMax as an Array, so that's working
However registering the AMP for the PowerMax to be able to use VPLEX provisioning failed. The new PowerMax should not require a SMI-S man-in-the-middle (as before with VMAX), so we tried adding a AMP and use the REST-API connection type, with SSL enabled. I searched the documentation but did not find guidelines how to register a PowerMax AMP (yet).
Environment:
VPLEX VS6 running 6.0.1.07.00.04 (target-code)
PowerMax 2000 running 5978.479.479 (latest GA)
Any clue and recommendations how to get VIAS provisioning working from VPLEX on the new PowerMax?
Thanks,
Jan-Pieter
DellEMCSupport
Moderator
Moderator
•
631 Posts
0
January 20th, 2020 14:00
Hello Jan-Pieter,
Have you tried to use this guide to confirm that you are following all the steps correctly? https://dell.to/36eDhWW
If you are still having issues, then I would suggest that you contact support & open a ticket so that we can look into this issue for you.
Please let us know if you have any other questions.
jpveen
1 Rookie
1 Rookie
•
85 Posts
0
January 21st, 2020 01:00
The document you are referring to does not include any specific information regarding the PowerMax, only VMAX. And if I am correct PowerMax should be able to configure VIAS using RESTAPI instead of the old SMI-S solution?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
January 23rd, 2020 10:00
Hello Jan-Pieter,
I would suggest that you call into support so that we can look deeper into this for you.
Please let us know if you have any other questions.