This post is more than 5 years old
8 Posts
0
1032
Cannot putty into primary MDM
Simply put, I am having issues starting a putty session to the primary MDM.
Has anyone else seen this issue?
This post is more than 5 years old
8 Posts
0
1032
Simply put, I am having issues starting a putty session to the primary MDM.
Has anyone else seen this issue?
Top
Carl-Adam_Lilje
32 Posts
0
June 26th, 2015 13:00
You can't use SSH to Windows hosts.
Windows doesn't have an ssh daemon
Use Remote Powershell :
https://technet.microsoft.com/en-us/magazine/ff700227.aspx
Carl-Adam Liljeholm
Sr. Speciality SE
EMC Software Defined Solutions
gc_emc
45 Posts
0
June 25th, 2015 06:00
Hi,
Can you give us more details of your setup?
What version of SIO you are running?
Are you running SIO on physical servers or ESXi servers?
Have you tried accessing the secondary server?
What steps are you taking and what error are you seeing ?
Can you ping the primary server from another server on the same network?
Is the primary MDM a vm?
Once we learn a bit more about your environment and issue we should be able to help you out
Thanks,
yukfaili
8 Posts
0
June 26th, 2015 12:00
Can you give us more details of your setup? 3 node cluster, physical servers running windows 2008 r2
What version of SIO you are running? 1.32
Are you running SIO on physical servers or ESXi servers? Physical servers
Have you tried accessing the secondary server? I get the same "Network Error: Connection Refused" message
What steps are you taking and what error are you seeing ? Merely just opening up putty and typing the IP of the primary mdm. Since this is a lab environment, windows firewall have been disable on all the nodes in the cluster.
Can you ping the primary server from another server on the same network? Yes
Is the primary MDM a vm? No, all physical servers
________________________________________________________________
From what i am reading, the default port for the scaleIO should be 22, correct?
yukfaili
8 Posts
0
June 26th, 2015 13:00
Ugh, Ok.
I see what I need to do now. I was trying to integrate it to ViPR and missed a whole section on how to get it to work with windows host.
Thank You