This post is more than 5 years old
13 Posts
0
857
ScaleIO 1.32 - Configuration SDS Device with Serial Device
Hi
I can use the serial number of the device ?
Ex: /dev/disk/by-id/scsi-3600508b1001cb7cedf9547ec3eabfd5c
So do not use letters. Ex: /dev/sdm, /dev/sdz
I added a device with serial number no problem as follows:
19: Name: SAS_DEV_SDM Path: /dev/disk/by-id/scsi-3600508b1001cb7cedf9547ec3eabfd5c Original-path: /dev/disk/by-id/scsi-3600508b1001cb7cedf9547ec3eabfd5c ID: 4938d7a200020012
Storage Pool: ISBAN_POOL_01, Capacity: 1116 GB Error-fixes: 0 scanned 368 MB, Compare errors: 0 State: Normal
SanjeevMalhotra
138 Posts
0
July 1st, 2015 13:00
In the previous post, Alex had responded:-
This will not solve the issue I've described above.
When SDS starts up, it reads all the available devices looking for ScaleIO signature.
It receives the list of the devices from /proc/partitions
Since /proc/partition contains the devices /dev/sd*, it won't be able to find the sdm devices, and will report on it a a missing devices.
Please make sure you address this issue as well
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 1st, 2015 11:00
Yes, that is correct