Solved!
Go to SolutionClosed
OptiPlex 990, Windows 10, PCI serial port driver
I have OptiPlex 990 purchased at the end of 2012 it originally had Windows 7 64-bit I upgraded to Windows 10 64-bit and I am unable to find a driver for the PCI Serial Port. I have found driver for Windows 7, but I'm unable to find it for Windows 10. When I go into the properties for the serial port it gives this information below.
Device PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&0&B3 requires further installation.
If anyone can help I would appreciate it
Thank You
George
Yes there's a device for my Anthem Stereo receiver (ARC) Anthem Room Correction that requires a serial port. According to the manual they do not want you to use any type of adapters because it will change the input to the ARC and throw off the balancing of the speakers.
I, too, would like to know if there is a Windows 10 driver available for this device. I have a number of OptiPlex 990's that I'd like to upgrade to Windows 10 and this is the only device it wasn't able to find a driver for. Granted, like you said, they generally aren't used anymore, but it's a "just in case" thing for me :)
Neo_Anderson_on
1 Message
237320
1
Posted November 19th, 2016 10:00
i tried the link below to a Sus x54h.. extracted the drivers and manually updated the driver and i works fine...
tgk20tgk20
1 Message
237319
1
Posted June 10th, 2017 19:00
thank you so much it worked like a charm
TheChupacabra
2 Posts
241075
0
Posted March 6th, 2018 05:00
Had same issue of Device Manager and PCI Serial Port on Windows 10 64 bit having a bang / missing driver. Have not tested, however this does remove the ! ... Thanks!
TheChupacabra
2 Posts
241073
1
Posted March 6th, 2018 05:00
Had same issue of Device Manager and PCI Serial Port on Windows 10 64 bit having a bang / missing driver. Have not tested, however this does remove the ! ... Thanks!
VanillaXtract
1 Message
237342
6
Posted July 22nd, 2016 13:00
Here is a link to a driver I found to work. I don't have any devices to verify that it works, but it removes the exclamation point. I unzipped the file, then unzipped the drivers in there and installed it. I did not use the setup.exe.