Unsolved
This post is more than 5 years old
2 Posts
0
2667
Server 2016 and ThinOS 8.4
Since upgrading our RDS from 2012 R2 to 2016, we've had an issue with the clients not being able to connect.
When logging into the client, the wyse 5010 just locks on VDI Authenticating.
WNOS.ini as below:
VDIBroker=https://*gatway address*
ConnectionBroker=Microsoft
SignOn=Yes
DomainList="*Domain Name*"
SessionConfig=RDP EnableNLA=yes EnableGFX=yes EnableTSMM=yes USBRedirection=RDP TSGWEnable=no
Looking at the IIS Logs we can see the following:
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 80 - 172.21.0.2 WTOS/1.0 - 302 0 0 0
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 443 - 172.21.0.2 WTOS/1.0 - 301 0 0 0
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 80 - 172.21.0.2 WTOS/1.0 - 302 0 0 0
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 443 - 172.21.0.2 WTOS/1.0 - 301 0 0 0
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 80 - 172.21.0.2 WTOS/1.0 - 302 0 0 15
2017-10-10 14:37:17 10.1.1.40 GET /rdweb/feed/WebFeed.aspx - 443 - 172.21.0.2 WTOS/1.0 - 301 0 0 0
But the terminal won't progress any further.
We're currently on 8.4.B108
Has anyone experienced anything similar?
johhen1
4 Posts
0
October 12th, 2017 09:00
Do you have correct certificates in place?
Have you tried without https:// in the VDIBroker setting?
Our config is working with latest ThinOS 8.4_108 and Server 2016 Gateways.
VDIBroker=portal.domain.com
ConnectionBroker=Microsoft
AddCertificate=GeoTrustPrimaryCA.cer
AddCertificate=BPClass3CA3.cer
AddCertificate=BPClass3Rot.cer
DR Foster
2 Posts
0
October 12th, 2017 09:00
Thanks for your reply.
Certificates are added in fine and are visible.
Our Windows PC's are able to connect through fine, it's just the Wyse which are locking up at VDI Authenticating screen.
For completeness, our SSL Details are:
AddCertificate=SSL_Root.crt
AddCertificate=SSL_Int.crt
AddCertificate=-.**Domain Cert**.crt