Unsolved
This post is more than 5 years old
10 Posts
0
8972
HDX 3D Pro
HDX 3D Pro
Hi, we have been unable to get HDX 3D Pro working from an R10 or D10 running 8.0.030 or 031 with a single monitor. We have confirmed that it works as expected from a Windows endpoint to the same blade workstation. The Wyse client connects successfully but the display updates unusably slowly (sections at a time).
Is there anything to configure in wnos.ini to enable this, or any other wnos.ini settings that we may have in place already which could conflict?
Thanks,
Al
JohnAtkins
129 Posts
0
June 23rd, 2015 05:00
Hello Al,
Can you inform as to what your HDX 3D Pro settings are? For example if you are using lossless, we will not be able to support it.
I've created some documention on what we do have supported. It is linked in the release notes, but you can also view it from the belowKB.
If that link doesn't work, you can go to www.wyse.com/kb and then type in solution #23115
Thanks
John