Unsolved
This post is more than 5 years old
2 Posts
0
22183
S10 USB mapping
S10 USB mapping
Hi All,
Could someone help me whit my problem?
We are useing wyse S10 thin client her but now we whant to use USB sticks. We are useing Citrix presentation server en RES powerfuse.
I can't find the problem why it is not working.
This is a what i have in my wnos.ini:
SessionConfig=ALL
MapDisksUnderZ=yes
MapDisks=yes
In powerfuse i have say everybody may connect USB devices.
I have googled alot and read some topics on the forum here but none of it have the same problem or the solution.
It would be realy great if someone can help me white this.
Best regards,
Roy
royw-2015
2 Posts
0
June 26th, 2015 08:00
answers
1 - in the event logs comes this:
USB: Found a new device "Mass Stroage"on port 4
D: file system register, type 0xb, size 8032MB
2 - the version is SQA 6.5.0_30
i hope you can tell me any more about it.
Best regards,
Roy
Rmontalvo1
623 Posts
0
June 26th, 2015 08:00
There are a couple of thing you may want to look into that may provide some answers:
1- Take a look at the event log to see what errors are you getting and let us know.
2- Check the firmware version of your S10. You may have a very old version. Please post the version here.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
aaricevans
3 Posts
0
June 26th, 2015 08:00
USB: Found a new device "Mass Stroage"on port 4
D: file system register, type 0xb, size 8032MB
2 - the version is SQA 6.5.0_30
i hope you can tell me any more about it.
Best regards,
Roy
Hey you have provided very helpful information which is helped me so much and I think it will help to many other people. I think you have much knowledge about it.
php company india
amerist
6 Posts
0
June 26th, 2015 08:00
USB: Found a new device "Mass Stroage"on port 4
D: file system register, type 0xb, size 8032MB
2 - the version is SQA 6.5.0_30
i hope you can tell me any more about it.
Best regards,
Roy
Have you looked in the Z: drive in Citrix for a D folder? This would be where your USB drive shows up