Unsolved
This post is more than 5 years old
1 Message
0
2281
Setting up a network printer
I am trying to setup a ThinClient ini file to simply create an RDP profile and redirect a network printer.
I have created the following ini files which creates the RDP connection correctly, however, the printer is not being defined in the thin client.
I have used the following reference document as a guide:
http://topics-cdn.dell.com/pdf/wyse-thinos-maintenance_Administrator-Guide_en-us.pdf
CONNECT=RDP \ Host=10.0.0.5 \ Description="Printer 10" \ Domainname=MYDOMAIN \ AutoConnect=yes \ Fullscreen=yes \ LocalCopy=no \ Lowband=no \ Colors=64k \ DisableSound=no Privilege=Low EnablePrinterSettings=Yes HidePPP=Yes DisableButton=No AutoPower=Yes Printer=LPD1 \ LocalName="HP LaserJet 4200n" \ Host=10.0.0.10 \ Queue=auto \ PrinterID="HP LaserJet 4200 PCL6" \ Enabled=yes
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 26th, 2018 10:00
Hi,
Can you private message me the service tag? Can you manually configure the printer, page 135 of that manual and have it work?
RMontalvo
560 Posts
0
August 7th, 2018 10:00
Dercni
You can define a network printer with the following parameter:
NetworkPrinter="Host/queue" \
PrinterID=
Where:
NetworkPrinter — Specifies the configuration for the network (LPD) printer in the same way as described for the Printer Setup dialog box in the Dell Wyse ThinOS Administrator’s Guide. The host and queue parameters define the IP address and queue name of the printer.
PrinterID — Specifies the Windows printer driver name.