Unsolved
This post is more than 5 years old
1 Message
1
87403
T10 devices very slow to boot
T10 devices very slow to boot
We have a number of Wyse T10 devices that is configured wiyh fixed IP addresses.
We do not at present use central configuration or WDM why no central servers (File or WDM) are specificed in the central configuration of the client and all WDM discovery options are deselected.
However, the client at boot still to try to locate a file server and the timeout for this causes the boot process to take several minutes.
Why does the device try to locate a file server when none has been specified ?
De we need to remove the DHCP options ID to disable central configuration completely and to prevent the device to contact DHCP. We dot not have DHCP available in the VLAN where the devices are located.
chritieraina
10 Posts
0
June 18th, 2015 07:00
Have you tried it by disabling the option
cordless vacuum
Atigon
2 Posts
0
August 17th, 2015 02:00
I have the same problem about slow boot times.
Where can I disable WYSE T10 to not searching for WDM and file server
RMontalvo
560 Posts
0
August 18th, 2015 10:00
What firmware version are you running on the T10?
Atigon
2 Posts
0
August 18th, 2015 19:00
System Version: 8.0_505