Unsolved
This post is more than 5 years old
1 Message
0
9548
Wyse 1200LE and Thin-OS 5.2_069
Wyse 1200LE and Thin-OS 5.2_069
Thin-OS version 5.2_069 is the latest for the Wyse 1200LE clients, but the problem I'm having is that when I logon to the PNAgent this username and password is not used in my Xenapp 6 session.
There I also get the Windows 2008 R2 logon screen.
We cannot buy new thin-clients because it is too expensive replace them, we have alot of these 1200LE devices.
Is there an another way so that my users do not have to logon twice?
hangulo1
167 Posts
0
July 1st, 2015 03:00
For XA6 it is highly recommended to use WTOS 7 at a minimum since alot of XA6 specific features have been added. You can try C10LE for a low cost option
KenC1
13 Posts
0
July 1st, 2015 03:00
My 1200 devices work reasonably well with XenApp 5. That might be your only recourse since the 1200 devices aren't going to get new firmware.
Another option would be to forgo Citrix and use remote desktop services. If you do this, note the the 1200 devices do not support per device licensing, and they don't play well with the new RD broker in server 2008 r2. Instead of the broker, you can use DNS round-robbin for quasi load balancing.