Unsolved
This post is more than 5 years old
2 Posts
0
50458
Wyse Cx0 Thin client Configuration
Wyse Cx0 Thin client Configuration
Hi All,
We have a new Thin client device with below config,
Dell Wyse Thin Client
Model : Cx0
OS : WTOS
Firmware: 8.0.*
As soon as I plugged in the device, have configured the Network settings (Static IP, DNS Domain and DNS server) and Now RDS server is accessible through Ping and RDP.
But while configuring the remote connection of App I’m getting the following error
Error: “SSL: Error ERR_CERT_Expired !
SSL: unable to setup connection, (err=-7606)”
Note: Self signed Certificates are not expired and valid till 2015.
Question: Kindly help me to configure the Remote connection from Thin client. Am i missed any N/W settings.
Regards,
Sundar
RustyMonkey
96 Posts
0
June 16th, 2015 05:00
You can use HTTP, but you may want to go to www.wyse.com/kb to get some guidance on how to set this up and you may want to make your life easier by downloading the tool ConfigGen fro www.freewysemonkeys.com.
sundark87
2 Posts
0
June 16th, 2015 05:00
Wyse Cx0 Thin client Configuration
Thanks for correcting the OS. Actually I didn't configure any File servers here (is that mandatory or can i use Http path here)?
How to change the wnos.ini file to make this work.