Unsolved
This post is more than 5 years old
1 Message
0
12391
Problem with PXE and updating a client
Problem with PXE and updating a client
I'm new to using Wyse terminals and WDM and all, and I've been able to find most things out by Googling. I can't figure out how to fix this issue.
I now have the server and client set up, with a Linksys WRT54G connecting the two. The server is running Windows 2003 R2 and the client is a Wyse V90.
I was trying to update XPeBootAgent so I sent the update, and after rebooting, it was trying to boot from LAN. The log:
Code:
Verifying DMI Pool Data ............
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997,1998,1999 Intel Corporation
VIA Rhine II Fast Ethernet Adapter v2.39 (2005/01/20)
CLIENT MAC ADDR: 00 80 64 37 65 D3 GUID: FFFFFFFF-FFF-FFFF-FFFF-FFFFFFFF FFFF
CLIENT IP: 192.168.1.135 MASK: 255.255.255.0
DHCP IP: 192.168.1.1 PROXY IP: 192.168.1.10
GATEWAY IP: 192.168.1.1
Auto-select:
Rapport PXE
BOOT SERVER IP: 192.168.1.10
PXE-E32: TFTP open timeout
TFTP....
The Linksys WRT54G is 192.168.1.1, the server is 192.168.1.10, and the Wyse V90 is 192.168.1.135.
Any help would be much appreciated!
Last edited by AmosEJ; 01-18-2011 at 02:37 PM.