Not applicable

upgrading firmware for WT312SE

upgrading firmware for WT312SE

Dear all

I have a WYSE WT3125SE client and I have setup a FTP server and also setup DHCP, when I boot the thin client it picks up the settings from the DHCP and points to the FTP server, but get the following error

"unable to read params.ini file from server"

I have downloaded the following file -

CE 5.0 Build 576
F576_Wye74.bin

The thin client is currently running microsoft CE 4.2

0 Kudos
2 Replies
Highlighted
2 Bronze

RE: upgrading firmware for WT312SE

When it is complete, the camera will delete the firmware file from internal memory.RAID firmware/driver update is in progress. This may take a few minutes.

 

 

 

 


Ideal is the beacon. Without ideal , there is no secure direction ; without direction , there is no life


All things are difficult before they are easy.

0 Kudos
Highlighted
Not applicable

RE: upgrading firmware for WT312SE

In the Folder on your FTP you have all 3 files in there correct? You must have the bootstrap212.exe, params.ini and F576_Wye74.bin in there for it to download properly.

0 Kudos