Unsolved
This post is more than 5 years old
2 Posts
0
3562
Wyse T10 USB redirection
Hi all,
i'm trying to connect an USB printers on my wyse but i can't make it work.
i've added the informations in my wnos.ini
did i miss something ?
see attached print screen and wnos.ini
;*************************************************************
;* General Session *
;*************************************************************
SessionConfig=ALL MapDisks=yes
Device=vusb ForceRedirect=0x067E,0×0005,0×07,0×01,0×02
thanks for your help,
cheers,
RMontalvo
560 Posts
0
May 10th, 2016 15:00
Raphael,
What is the make and model of the printer you are connecting? You may also want to visit our knowledge base at www.wyse.com/manuals and search for KB22971 which is a=our WTOS printer configuration guide.
Raphael_Delecou
2 Posts
0
May 11th, 2016 01:00
Hi Roger,
thanks for your answer.
its an industrial bar code printer "Intermec PF2i"
i had a look at the KB but it has nothing to do with the bar code printer.
Do you know what "bi-direction' means ?
RMontalvo
560 Posts
0
May 20th, 2016 11:00
Raphael,
bi-directional just means that the communication between the printer and the connected system can come from either side. the document I recommend is on How to connect a printer. I does not matter if the printer is a matrix, inkjet, laser, barcode or any other type. WTOS does not have a printer manager, so a s long as you follow the instruction on how to configure a locally attached USB printer, it should work.