Unsolved
This post is more than 5 years old
3 Posts
0
5352
Xenth Bios
Xenth Bios
I have been trying to find a way to make the xenith power on after power failure ( people keep switching wall plug off) but xeniths are in tray under desks.
today one was at a bios screen so using Fireport as password i changed bios to power on ater failure
How do i get into bios on other 59 xeniths cant figure it out
hangulo1
167 Posts
0
May 13th, 2015 02:00
Keep in mind you have to unplug the power source from Xenith, only then on next boot will you have access to BIOS. Xenith is optimized such that we dont run the BIOS on every restart since hardware is already initialized (we only run it when power is first plugged in).
DaFishe
29 Posts
0
May 13th, 2015 02:00
to access the BIOS
To access the BIOS power off the unit.. hold down the Delete key while the device boots.
it will boot into the Xenith firmware, then reboot into the BIOS screen prompting for a password.