Start a Conversation

Solved!

Go to Solution

1279

September 13th, 2020 05:00

XPS 8910, spare 8 pin connector?

Hi,

I bought an XPS 8910 desktop in 2016 and it came with the Nvidia GTX 745 4GB (not a full sized card.)

Just wondering if there is a spare 8 pin cable in the case to connect a full sized card?

 

Thanks,

Matt

13 Posts

September 13th, 2020 22:00

I opened it up.

Will mark results here for anyone else who has this question.

 

Confirmed - there is a 6x2 supplementary power connector and IN ADDITION a 6 pin one.

Moderator

 • 

25.7K Posts

September 13th, 2020 05:00

Thank you! We have received the required details. We will work towards a resolution via private messages to ensure the security of your information. In the meanwhile, you may receive assistance or suggestions from the community members as well.

4 Operator

 • 

3.2K Posts

September 13th, 2020 05:00

The easiest way to answer your question is to open the case and look. The real question you should be asking is whether or not the full-size graphics card that requires an 8-pin supplementary power connection you are considering can be adequately powered by the stock 460-watt power supply that comes with the XPS 8910.

13 Posts

September 13th, 2020 06:00

Will do, just thought if someone knew the answer off the top of their head I could avoid the hassle and potential for something to go wrong, knowing my luck something probably would  .

The recommended system power is 450W, with the PSU being 460W. It's pretty close and am waiting for advice through other support channels, just came here wondering this.

Thanks. 

9 Legend

 • 

47K Posts

September 13th, 2020 11:00

There is no such thing as a SPARE 8 pin PCI-E power connector.

8 Pin is 2X  6 pin and implies 225 to 300W video card

https://www.amazon.com/PCIe-Adapter-Power-Cable-Graphics/dp/B085VQ94YJ/

dual 6 to 8 aka 150w AUX POWERdual 6 to 8 aka 150w AUX POWER

700w 850w ETC HAVE 2x 6+2700w 850w ETC HAVE 2x 6+2

 

 

 

 

 

 

 

Diagnostics and Error Codes:

This section provides links to articles about diagnostics and the various error messages, beep codes and Diagnostic LED codes that can help to troubleshoot potential hardware and software issues on your system.

You can also use the diagnostics that are on the Dell Support page, this requires Dell System Detect & SupportAssist to be installed on your system. This is performed if you choose to run the diagnostics. You can get to those diagnostics by following the link below:

 

 

13 Posts

September 13th, 2020 13:00

Thanks speedstep, main concern was if there the PSU has anywhere to accept new connections because it's a prebuilt PC.

No Events found!

Top