I cannot find the alienware aurora r7 lighting connector (part # 31117 or SA_006_02 I think) on the case that connects to the removable side panel lighting system. Can someone please point me in the right direction to get one ordered?
Yes, over the years ... other Aurora R5/R6/R7 owners have occasionally posted about those fragile contact-pins getting damaged.
After you get the new part installed (with perfect contacts), try to always: - Properly align and fully seat the bottom of cover in lower groove - Press the top of cover straight towards machine, snapping into place - Don't be in a hurry and don't force it - If it doesn't feel right ... remove slightly and start over
I usually do any cover removal/re-installs with power OFF.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Yeah those pins/contacts are delicate. Do you happen to know where I can order a part?
@DELL-Chris M should see this an get you a DPN . If a part exists separately, he can find the part number. :Cool:
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
31117 is not appearing in the parts tool as a separate part. Page 30 shows us that 31117 is included with the right side cover? Look on that side cover for part number NDP7T. You should also private message Alienware - Rodrigo to get further assistance.
Carefully re-form that end-pin ... with a magnifying-glass, plenty of light, and needle-nose pliers ... obviously with power-off and unplugged.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Tesla1856
10 Wizard
•
17982 Posts
•
71587 Points
3762
0
Posted August 24th, 2018 09:00
Yes, over the years ... other Aurora R5/R6/R7 owners have occasionally posted about those fragile contact-pins getting damaged.
After you get the new part installed (with perfect contacts), try to always:
- Properly align and fully seat the bottom of cover in lower groove
- Press the top of cover straight towards machine, snapping into place
- Don't be in a hurry and don't force it
- If it doesn't feel right ... remove slightly and start over
I usually do any cover removal/re-installs with power OFF.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.