I had a Windows update pushed through to my Aurora R9 Monday, and since then it won't POST after a cold start unless I pop it open and remove a pair of DIMMs, boot to the memory confirmation screen, shut down and re-install the removed modules.

Once I change the memory config, it will default to the "memory changed" screen.  If I run the diagnostics, everything passes fine, but it powers off and I have to reverse the process to get it to POST again (ie, put back the 2 removed modules).  If I simply accept the memory change, it boots to Windows fine, but I have to repeat this weird ritual every single time I shut down or restart, or it just hangs with no display and no apparent power to the wired keyboard after pressing the power button.

I've tested it by going through the full self-test with every combination of memory config I can (2x 8GB Fury DIMMs from factory + 2x aftermarket 8GB Fury DIMMs), and it never returns a fault.  I've re-flashed the BIOS (1.0.14), but the same problem persists.

Anyone else having the same problem?