I'm fairly new to this, but am getting the following errors repeated hundreds of times. This is on a clustered server and I've already reinstalled the client. It's timing out when it hits the 4 hour limit that is set for that backup. This backup generally runs in just over an hour, so the four hour limit should be just fine.
Any suggestions would be greatly appreciated!
2010-05-20 02:30:03 avtar Info <5581>: - Logging in on connection 0 with Session Ticket 2010-05-20 02:30:03 avtar Info <5582>: - Login successful 2010-05-20 02:30:03 avtar Info <5390>: Rebuild of connection 0 complete 2010-05-20 02:30:04 avtar Info <5387>: Network error occurred: Rebuilding connection 0 2010-05-20 02:30:04 avtar Info <5661>: - Rebuild attempt 1 for connection 0 2010-05-20 02:30:04 avtar Info <5993>: - Datacenter 0 has 1 nodes: Connected to 10.10.39.33:27000, Priv=0, TCP 2010-05-20 02:30:04 avtar Info <5388>: Reconnected to server 10.10.39.33:27000 2010-05-20 02:30:04 avtar Info <5581>: - Logging in on connection 0 with Session Ticket 2010-05-20 02:30:04 avtar Info <5582>: - Login successful 2010-05-20 02:30:04 avtar Info <5390>: Rebuild of connection 0 complete 2010-05-20 02:30:33 avtar Info <5387>: Network error occurred: Rebuilding connection 0 2010-05-20 02:30:33 avtar Info <5661>: - Rebuild attempt 1 for connection 0 2010-05-20 02:30:33 avtar Info <5993>: - Datacenter 0 has 1 nodes: Connected to 10.10.39.33:27000, Priv=0, TCP 2010-05-20 02:30:33 avtar Info <5388>: Reconnected to server 10.10.39.33:27000
The log shows you are having some kind of connectivity issue.
Can you double check the state of network connectivity. Also you said this is a clustered server. Depending on the location of the data you are backing up, you might need to install client software on all the servers in the cluster. If you are just backing local file system for each servers then you will not need to worry about this but if the data is shared by all the servers in the cluster then you need to look at the Admin Guide on how to treat clustered servers.
Thanks for the reply but we’ve found the issue. Our antivirus program was causing the issue. After we added a couple of exceptions, it is back working as it should.
Sojero
11 Posts
895
0
Posted May 25th, 2010 09:00
Hi Tom,
The log shows you are having some kind of connectivity issue.
Can you double check the state of network connectivity. Also you said this is a clustered server. Depending on the location of the data you are backing up, you might need to install client software on all the servers in the cluster. If you are just backing local file system for each servers then you will not need to worry about this but if the data is shared by all the servers in the cluster then you need to look at the Admin Guide on how to treat clustered servers.