Yup i can see the 2 IP's in the resol.conf file and as you here all this is related to this error

[nasadmin@mpbwnsg1 ~]$ date;nas_cel -e id=3 "nas_fs -l";date
Mon Jul 12 14:57:52 EDT 2010

Error 2241: Remote command failed:
remote celerra     = mpannsgw1
remote exit status = 0
remote error       = 4446
remote message     = CURL Error code: 35, Error message: error:14077438:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert internal error
Mon Jul 12 14:57:53 EDT 2010

Any idea on this?

Do you see your dns servers in /etc/resolv.conf ?

Please refer this primus  emc134484, hope this will be helpfull for you.

Let me know if this doesnt corresspond the exact issue.

Sameer Kulkarni

I did try this primus but no luck......

I did add the the Celerra IP in the DNS file and nslookup isssue is resolved bbut this issue is long lasting one

[root@mpbwnsg1 nasadmin]# date; nas_cel -exec id=3 "nas_fs -l"
Wed Jul  7 12:35:10 EDT 2010

Error 2241: Remote command failed:
remote celerra     = mpannsgw1
remote exit status = 0
remote error       = 4446
remote message     = CURL Error code: 35, Error message: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number

nas_cel -update id=3 please run this command and try running your previous command and let me know.

Sameer

Can you please let me know what is the nas version on both the Celerra?

Sameer Kulkarni

Let me confirm I am not very sure of this command,

if I am not wrong you are trying to exec the command "nas_fs -list" on the Celerra with the id=3, am I correct?

Sameer Kulkarni

This is the version on both the celerra's

[nasadmin@mpbwnsg1 ~]$ nas_version
5.6.40-3

Are you doing nslookup for the local host, i.e. local Celerra?

are you able to ping the DNS server, please make sure that everything is fine from the network side

Sameer Kulkarni.