Solved!
Go to SolutionChange File System Mount Properties through GUI
I want to change a file system so it no longer gets scanned by anti virus.
I went into the Celerra Manager and went to the Mount properties and unchecked "Virus Checking Enabled". Does that change occur immediately?
After doing this, if I run the command
server_mounts server_2
it shows that file system is set to no scan...
does this mean it took it and is active?
pfs-arx on /root_vdm_5/pfs-arx uxfs,perm,rw, noscan,triggerlevel=256,accesspolicy=NATIVE,nolock
If it is not affective immediately what do I have to do to make it active?
I appreciate the help
chris
I went into the Celerra Manager and went to the Mount properties and unchecked "Virus Checking Enabled". Does that change occur immediately?
After doing this, if I run the command
server_mounts server_2
it shows that file system is set to no scan...
does this mean it took it and is active?
pfs-arx on /root_vdm_5/pfs-arx uxfs,perm,rw, noscan,triggerlevel=256,accesspolicy=NATIVE,nolock
If it is not affective immediately what do I have to do to make it active?
I appreciate the help
chris
gbarretoxx1
2 Intern
•
366 Posts
196
0
Posted November 7th, 2009 16:00
yes, this does mean that viruschecker is disabled for this specific filesystem.
If you look at the server_log, you should see something similar to :
ADMIN: 6: Command succeeded: serverMount uxfs rw /fs_test 413=261 rw noscan (modifyMount)
Gustavo Barreto.