Solved!
Go to SolutionEMC Noobie: ISCSI and Clustering
Hi All
We have just had our new EMC Celerra NS40 installed. It is working properly and has been configured for CIFS shares and ISCSI. However I wanted to know if it was possible to setup a new ISCSI target using the same luns as another ISCSI target to create shared storeage for a MS Windows Cluster.
If this is possible could someone point me in the right direction
Thanks
Gavin
We have just had our new EMC Celerra NS40 installed. It is working properly and has been configured for CIFS shares and ISCSI. However I wanted to know if it was possible to setup a new ISCSI target using the same luns as another ISCSI target to create shared storeage for a MS Windows Cluster.
If this is possible could someone point me in the right direction
Thanks
Gavin
268
0
Posted April 10th, 2007 01:00
Hi Ral
Thanks for the pointer. I have it all sorted now.
Regards
Gavin
Rainer_EMC
6 Operator
•
8645 Posts
268
0
Posted April 6th, 2007 12:00
BUT for cluster storage you dont need to targets. just use the ISCSI masking to allow more than one host to access the LUN thru the same target.