
Solved!
Go to SolutionD
darrendurgha
57 Posts
0
842
April 15th, 2010 07:00
nas commands
Is there a doc that lsit all nas commands. To start I need to check my system model numbers .
Thanks...
Responses (8)
Solutions (0)
Rainer_EMC
6 Operator
•
8645 Posts
428
1
Posted April 15th, 2010 10:00
funnily /nas/sbin/model is one of the commands that isnt documented in the CRM :-)
Reply darrendurgha
57 Posts
428
0
Posted April 15th, 2010 11:00
mee too.. :-) but I'm just starting to get use to 5.6
Thanks again Dynamox...
Reply IanSchorr wrote:
dynamox wrote:
i have high expectations for DART 6.0 and documentation associated with it
Oh, rest assured 6.0 is the best Celerra release yet. There's some good stuff packed in.
However, you do have very high standards... Very high... =)
i would not expect anything less of EMC
Reply

dynamox
11 Legend
•
20419 Posts
•
87439 Points
428
0
Posted April 15th, 2010 11:00
i have high expectations for DART 6.0 and documentation associated with it