UNSOLVED

FresnoRed

updated

18 years ago

F

FresnoRed

90 Posts

0

1395

February 26th, 2009 11:00

NAS event logs

I know this has been asked before! I may have asked it myself, but I'm getting hammered again about setting the size of the event logs on a data mover. We put in a RSA enVision appliance and I thought that would be the end of this issue, but our security people are whining again about the security log being too small. The RSA docs and the install person who came in were real good on their product, but not much help on what to do on the Celerra. I have a 704G running at 5.5.28.1.

I have about 10T of user files at this point so I really don't want to mess with a good working environment. I understand the file size of the security log is set at 512k, and that with a hack that file can be relocated, but I don't know (lost if I ever had it!) how to do it and if it is recognizable by enVision.

Would appreciate any words of wisdom, or references, for increasing the logging.

TIA,
Harold
  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    673

    1

    Posted February 26th, 2009 11:00

    Hi Harold,

    the reason for the security.evt size limit is that by default its located on the data mover root file system, which has limited space.

    To increase it simply move it to a new or an existing data file system and then you can increase its size, as described in the attached the manual or KB emc69252

    regards
    Rainer

    1 Attachment

  • FresnoRed

    90 Posts

    673

    0

    Posted February 26th, 2009 14:00

    Ranier,

    Thanks, that was what I was looking for! Since this puts the log in a different location, do you know of any way to create a symbolic link at the old location, or is that asking too much?

    Thanks again,
    Harold