UNSOLVED
Optical Cable Type for Celerra
Good Evening Folks...Could someone please tell me what the spcifications would be for optical cables to connect the 10 Gigabit ports on an NX4 Data Mover to a like ended switch? As far as I can tell it would be:
5m 10 Gb LC/LC Duplex 50/125 Multimode Fiber Patch Cable
LOMMF, Laser-optimized "Aqua fiber" for LED/VCSEL laser light sources and 10 gigabit applications
Would th is be correct?
Thank You.
Mike
Rainer_EMC
6 Operator
•
8645 Posts
241
0
Posted April 20th, 2010 11:00
Hi Mike,
the 10Gbit interface is compatible the following:
short-range transceivers 850nm with multi-mode fibers Cisco XENPAK-10GB-SR
http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5251_Products_Data_Sheet.html
It uses an LC connector. multi-´mode fiber with 850nm and 50.0 or 62.5 micron cables
Rainer