Solved!
Go to SolutionUsing emcopy
I am trying to use emcopy to copy a large file system to a smaller one. Here is the output I am getting when I try:
D:\CifsTools\emcopy\nt>emcopy \\rshbgfs2\FS_community_replica1 \\rshbgfs2\FS_community
EMCOPY 04.00
Copyright (C) 2008, All Rights Reserved,
by EMC Corporation, Hopkinton MA.
System information
==================
Client OS : Microsoft Windows XP Professional Service Pack 3 (build 2600)
Unable to get information from \\rshbgfs2\FS_community pathname
Error (53): The network path was not found.
Retrying in 30 seconds...
Unable to get information from \\rshbgfs2\FS_community pathname
Error (53): The network path was not found.
Retrying in 30 seconds...
Unable to get information from \\rshbgfs2\FS_community pathname
Failed after 100 retries.
Error (53): The network path was not found.
Server::GetFromPath: unable to connect to \\rshbgfs2\FS_community :
Error (53): The network path was not found.
Copy engine Statistics
======================
No File copied
No Directory created
Amount of copied byte(s) : 0 Byte(s) (0 Byte(s))
Elapsed time: hours: 00, mins: 00, secs: 40
I am fairly sure I am doing something wrong, but the documentation for emcopy is a bit hard to decipher. Any help would be appreciated.
David
D:\CifsTools\emcopy\nt>emcopy \\rshbgfs2\FS_community_replica1 \\rshbgfs2\FS_community
EMCOPY 04.00
Copyright (C) 2008, All Rights Reserved,
by EMC Corporation, Hopkinton MA.
System information
==================
Client OS : Microsoft Windows XP Professional Service Pack 3 (build 2600)
Unable to get information from \\rshbgfs2\FS_community pathname
Error (53): The network path was not found.
Retrying in 30 seconds...
Unable to get information from \\rshbgfs2\FS_community pathname
Error (53): The network path was not found.
Retrying in 30 seconds...
Unable to get information from \\rshbgfs2\FS_community pathname
Failed after 100 retries.
Error (53): The network path was not found.
Server::GetFromPath: unable to connect to \\rshbgfs2\FS_community :
Error (53): The network path was not found.
Copy engine Statistics
======================
No File copied
No Directory created
Amount of copied byte(s) : 0 Byte(s) (0 Byte(s))
Elapsed time: hours: 00, mins: 00, secs: 40
I am fairly sure I am doing something wrong, but the documentation for emcopy is a bit hard to decipher. Any help would be appreciated.
David
- Ok, now I feel a bit stupid. The name of the share on the data-mover is FS_community, but it is just Community on the file share side. Taking all that into consideration, I still did not get the data to copy:
D:\CifsTools\emcopy\nt>emcopy \\rshbgfs2\FS_community_replica1 \\rshbgfs2\Community
EMCOPY 04.00
Copyright (C) 2008, All Rights Reserved,
by EMC Corporation, Hopkinton MA.
System information
==================
Client OS : Microsoft Windows XP Professional Service Pack 3 (build 2600)
Server SRC : RSHBGFS2 5.0 EMC-SNAS:T5.6.40.3
Server DEST : RSHBGFS2 5.0 EMC-SNAS:T5.6.40.3
Command information
===================
Date : 14/05/2009 11:36:56
Source path : \\rshbgfs2\FS_community_replica1\
Desti. path : \\rshbgfs2\Community\
Files and Dirs filter(s) : *
Directory options :
List/Modify/Create options :
Security options: :
Retry options : /r:100 /w:30
Processing the copy from \\rshbgfs2\FS_community_replica1\ to \\rshbgfs2\Community\ ...
Copy engine Statistics
======================
No File copied
No Directory created
Amount of copied byte(s) : 0 Byte(s) (0 Byte(s))
Elapsed time: hours: 00, mins: 00, secs: 03
Any ideas? I appreciate the help. - I played with the trailing "\" and also added the "/s" flag and it is copying some of the data. I am trying to copy archived data with this program so I need to preserve stub files and not recall them from my centera. It appears to be recalling them though. I am also getting a security descriptor error for a large number of files and directories.
Security Descriptor error: Unable to open directory for setting SD
Error 1314: A required privilege is not held by the client.
Any ideas and thanks for everything so far.
David Rainer_EMC
6 Operator
•
8645 Posts
2261
1
Posted May 14th, 2009 11:00
Security Descriptor error: Unable to open directory for setting SD
Error 1314: A required privilege is not held by the client.
Thats a sign that the account running emcopy doesnt have the necessary user rights like backup/restore privilege
see the manual
Using EMC Utilities for the CIFS Environment
on page 45
dynamox
11 Legend
•
20419 Posts
•
87439 Points
2261
0
Posted May 14th, 2009 10:00