Solved!
Go to SolutionA
ALEX_SERYOGIN
71 Posts
0
1080
October 23rd, 2008 02:00
Unlock failed 3
Good day.I am CentraStar updated to version 3.1.3-2292-936-20444. Updates went well, although after the upgrade, I can not enter through the Centera Viewer. My attempt to unlock ssh, was not successful:
login as: emcservice
Sent username "emcservice"
emcservice@10.255.0.1's password:
Last login: Mon Dec 5 19:50:05 2005 from admin
!!! WARNING !!!
Command line access should be used only by authorized EMC personnel.
If you are not authorized, please close this session now. You can do
severe damage to the cluster by making mistakes here.
[emcservice@centera service]$ sudo FPunlock_node
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these two things:
#1) Respect the privacy of others.
#2) Think before you type.
Password:
Unlock failed 3[emcservice@centera service]
in ProcedureGenerator says that perhaps this problem is FilePool. IP, port, login and password exactly right! How do I unlock?
login as: emcservice
Sent username "emcservice"
emcservice@10.255.0.1's password:
Last login: Mon Dec 5 19:50:05 2005 from admin
!!! WARNING !!!
Command line access should be used only by authorized EMC personnel.
If you are not authorized, please close this session now. You can do
severe damage to the cluster by making mistakes here.
[emcservice@centera service]$ sudo FPunlock_node
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these two things:
#1) Respect the privacy of others.
#2) Think before you type.
Password:
Unlock failed 3[emcservice@centera service]
in ProcedureGenerator says that perhaps this problem is FilePool. IP, port, login and password exactly right! How do I unlock?
