I'm sorry please explain I dont understand. What do you mean loosing a chance of loosing data that resides in spare drive?

I am not too familiar on how to use the spare drive never use it before. Please explain and answer.

Can you create a regular disk drive Raid 10 or Raid 5 on a spare drive?

Can I create a multiple disk of Raid 5 or 10 using the spare drive?

I just want to move the data from a bad performing disk temporarily to a good disk until I reformated the orginal disk?

I am thinking to perform LUN migration just to move the Data to the newly created disk which is the spare disk when the data is there intact with no problem

reformat the original Disk Raid 10 and perform another LUN migration from the spare disk, what problem do you foreseen on this scenario because I have

to do this in Production drive. Thank you for your help and let me know.

Can you tell me if can I LUN migrate Raid 10 disk with data to a Spare drive? No available disk in the Clariion except the Spare Drive.

Can I make the spare drive usuable like a normal disk like RAid 5?

EMC says that the current disk have a preformance problem due a problem so this RAID 10 disk needs to be reformated and migrate

the data first to a new LUN but I do not have anything available except the Spare.

What should I do?

Wait I am trying to find the EMC case # stating t backup and restore this current V-drive (2.3 TB) create a new disk make it Raid 10 and restore the data due to performance problem. Description finding by EMC- I have the printed report by EMC here I will type it in I have no soft copy Im waiting for the case# too.

UPS United Parcel Service - Clarion sn# APM00062603769- site ID 17736

Case number? still waiting who opened this call Manish Arora of UPS

He is from CPM Group in UPS - Capacity Performance Management

CX3-80 Metalun Drive V LUN of meta of 7 luns each 468 GB made of 8 15krph FC disks

Total IOPS this LUN can handle is 10,080 IOPS showing low IOPS

LUN response time - graphs spiking

LUN itulization the graphs looks spiking up high to 106

Current Disk Utilization - its says Backend Disks are up to 60% MAX utilized

number of stripe crossing - 783639393

number un-used blocks prefetched 784735716

EMC Analysis of Cluster server 0014\0015 Windows 2003 SP2 SAN switch going to Clarion CX3-80

* Increase number of IOPS by 1000 IO's as compare to the last time

* SPA utilization has increased from 44% MAX to 64% MAX

* The IO type is still heavy Random Reads

*The Read Cache hit is almost equals to 30% to 40%

*Pre-fetched blocks are not been used due to random read IOPS

*The drives are MAX 60% utilized

*Disk crossing is occuring while reading or writing data as alignment offset is set to default zero

Previous recommendation by EMC:

*Due to the extreme amount of random reads, the Application needs to tune their Application

*Current Recommendation:

*Due to the extreme amount of random reads, the application needs to tune their application

* Set the alignement offset to 64 KB in order to stop disk crossing

*Can set the pre-fetch Multiplier to 2 or 0 on LUN 17 in order to stop pre-fetching blocks to read

Note: there us a down-time required on both activities. For setting the alignment offset data needs ti backed up and restored.

MY Question to EMC right now is - instead of backup and restore I want to do a LUN Migration instead but I do not have a 3.2

TB on CX3--80 all I have are all spare drives. Can I use the spare drives to create a 2.3 LUNS to move the data temporary ONLY.

Once the data is migrated from LUN 17 Raid 5 to the Spare disks - I will format the orginal disk LUN 17run diskpart and perform

another lun migration move data from Spare disk to the newly formated LUN 17. Can you answer my question please,

Can I create a 3.3 TB of metalun out of a sparedisk? YES or No?