We have purchased an SC4020 enclosure along with an SC200 expansion enclosure and the configuration is as follows
24 x 300 GB @ 10,000 RPM
7 x 3 TB @ 7200 RPM
Do I still need to set a storage profile for all 3 tiers when setting this up in the storage center setup wizard? Will I have 2 or 3 tiers of storage once this is completed?
You will have two Tiers - you should be using the recommended Storage Profile unless you have some urgent reason not to. Your 3rd Tier is very spindle short - you may have issues over time - so keep an eye on it.
Like others have stated you will have 2 storage tiers. Also as others have stated that it is bet to use the Recommend Storage profile so that Data Progression will move your data between Tier 1 & Tier 3. Since you only have 2 types of drives SATA, & 10K that is why you only need 2 storage tiers. Now if you had 15k, 10k, & SATA drives then you would have 3 tiers of storage.
Please let us know if you have any other questions.
mtanen
118 Posts
673
0
Posted March 28th, 2015 13:00
You will have two Tiers - you should be using the recommended Storage Profile unless you have some urgent reason not to. Your 3rd Tier is very spindle short - you may have issues over time - so keep an eye on it.