I've tried many times to enable TPM using an .exe created with the Command | Configure 3.0.0 utility. No matter what I try, when I try to activate TPM, I get an error in the log that says:
cctk - Error in Setting the Value.
Note: To set TPM - 1. Admin Password must be set , 2. TPM must not be owned and 3. TPM must be deactivated.
I have tried with a password and without a password. When I run the .exe, all of the above 3 items are valid.
I am able to enable TPM but it will never switch to 'Activated'
We don't put together a .EXE, but have a WinPE USB with CCTK. From that we have an 'EnableTPM.cmd' BATch file that runs and works OK on devices that HAVE NOT had any previous TPM settings.
Create another EXE to enable and activate TPM, when clicking Export EXE select the option to use password information and put th epassword you have set in EXE file 1
karthikchandran89
1 Rookie
•
49 Posts
38650
0
Posted April 20th, 2015 00:00
Hi RMFALCONER,
Please try the below options and if you are still facing issues, please help us with more information on the Configuration and Bios Version.
1. Try to clear the TPM in Bios/F2 screen and try the steps again.
2. System must be restarted once when the TPM is made ON ( enabled ) .
3. Also please check if steps in video are working fine manually after installing DCC.
Regards,
Karthik.C