I had to have Windows 10 reinstalled due to a computer crash after a windows update. After getting my computer back and updating everything with Dell and downloading printer drivers, I noticed that PCI Data Acquisition and Signal Processing Controller, PCI Memory Controller, and SM Bus Controller have exclamations next to them. I run the troubleshooter on all of them, but it couldn't find the problem. Do you know of drivers I could install to correct the problem? Dell shows that everything has been updated.
Install in order listed, and reboot in between each installation.
Any other drivers that Win 10 didn't automatically install or are marked with ! or X in Device Manager when you reboot after doing #3, can be found here.
Thank you Ron. And I only needed to Install the Intel Chipset Driver and It fixed the issues. Searched for awhile to find this solution. Again Thank You.
RoHe....this worked for me, I used to have those 3 Exclamation Marks, this is an Eye Sore, I have a Dell XPS 8900 i5-6500, the way I did it is, I installed them in order, but did a reboot on the third/last download, still, worked, Thank You very much.
I did try that, disable secure boot, but nothing, the new gpu is actually powering up, fan spinning, but blank screen, tries to take out cmos battery, and reset bios using mobo jumper, still nothing
XPS 8900 GPU upgrade AMD Radeon R9 270 2GB DDR5 no Display.......redxps630 is the one trying to help me....my PC is a Dell XPS 8900 i5-6500 32GB RAM 750w PSU...replacing a GT 730 2GB DDR3
RoHe
12 Elder
•
45230 Posts
•
172625 Points
2623
0
Posted March 14th, 2022 18:00
Install in order listed, and reboot in between each installation.
Any other drivers that Win 10 didn't automatically install or are marked with ! or X in Device Manager when you reboot after doing #3, can be found here.