Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
View continous availability from cli
I have ran multiple command variations without success. I am trying (other than looking from within the gui) to see whether or not CA is enabled on a share / shares on our Isilon. Can this be done if anyone knows? Would be a lot faster vs. me having to click each share and viewing its properties from the gui.
(edited)
Hi,
do you want to see
a) whether a client connected via SMBv3 uses the CA feature or
b) whether CA is activated for an SMB share in general?For a) there is no easy way.
As far as I know, this is only possible if you look at the SMB connection via Wireshark or the PCAPs of the session.
For b) you can use the CLI. However, you must specify the AccessZone and the share name, e.g. for the ifs$ share:
isi smb shares view --zone=System ifs$ | grep "Continuously Available"
DELL-Sam L
Community Manager
•
8095 Posts
•
34547 Points
0
0
Posted March 4th, 2024 21:24
Hello footunny,
I am not aware of any command to view CA via CLI.