Solved!
Go to SolutionD
digitaltos
1 Rookie
•
4 Posts
1
55238
January 26th, 2021 00:00
WD19TB usb not working on startup
Hi. I have a Latitude 7410 and a WD19TB dock, running the latest Windows 10. I have peripherals and a monitor connected to the dock.
When I boot up the laptop and get to the Windows login screen, the mouse and keyboard connected to the dock do not work (the monitor does). If I plug the mouse or the keyboard directly to the laptop, they work. If I log in using the laptop keyboard, the peripherals start working, and they will still work if I go back to the Windows lock screen.
This is a bit annoying, I always want to use my USB keyboard to log in. What can I do to make this work?
antspants77
3 Posts
29997
2
Posted August 30th, 2021 23:00
Hi, a customer had a similar issue on a
Latitude 7320 connected to a WD19TB USB-C Dock.
We had inconsistent reports where either/both the internal keyboard or external keyboard were not working in the preboot environment. They noticed this as they had BitLocker that requested a key on bootup, prior to loading Windows. Original post was only in Windows, so not exactly the same issue.
The fix that worked was from this page =
Check the laptop BIOS- USB configuration and enable the following =
Enable USB Boot Support
Enable External USB Port
Enable Thunderbolt Boot SupportJesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
23098
0
Posted January 26th, 2021 06:00
digitaltos,
https://dell.to/2YfEUlR
Installing drivers = Note: Update your laptop’s BIOS and the Dell Docking Station drivers to the latest versions available at Dell Drivers & Downloads website before using the docking station. Older BIOS versions and drivers could result in the docking station that is not recognized by your laptop or not functioning optimally.Dell-Jesse LJesse L (retired)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
23098
0
Posted January 26th, 2021 06:00
digitaltos,
Please allow us some time to review the issue and reply back to you.
Jesse L (retired)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
23090
0
Posted January 27th, 2021 10:00
digitaltos,Following up to see if the information helped resolve your request? Let us know.Jesse L (retired)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
23040
0
Posted January 29th, 2021 08:00
Argordeus,Apologies, allow us some time to research the problem and respond back to you.Jesse L (retired)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
23054
0
Posted January 29th, 2021 09:00
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
6261
0
Posted February 8th, 2021 05:00
Jesse L (retired)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
5414
0
Posted June 20th, 2022 04:00
Following up to see if you resolved the issue as you stated you will troubleshoot the issue by yourself? Let us know.
Jesse L (retired)
digitaltos
1 Rookie
•
4 Posts
23067
0
Posted January 28th, 2021 08:00
Hi Jesse. Thanks, I have updated the BIOS and the dock firmware, but unfortunately there is no change.
HSLU-HES
3 Posts
29836
2
Posted July 22nd, 2021 23:00
If you are using the Microsoft Baseline then you can change the following GPO-Setting to enable the Devices on the Thunderbolt Dockingstation bevor logon. Depending on your requirements in security, this option is not realy acceptable as it enables an attack vector to attack BitLocker.