I am trying to install Linux Mint alongside my Windows 10 home but when I want to install it from the USB drive, some kernel issue shows up on the black screen and it does not want to boot.
I tried different variations that numerous articles suggest such as turning off fast startup, turning off secure boot from BIOS, changing secure boot mode to audit mode and enabling AHCI.
However, I have not had any success.
Could someone please help as I would like to have Linux installed alongside Windows.
First, the system likely shipped in RAID mode - - and many (most) Linux distributions won't install natively with the drive controller in RAID mode.
Second, if your system does not have the option of booting in Legacy (CSM Option ROM) -- and it's new enough it may not -- you will need a Linux distribution that fully supports UEFI booting. Few do - the one that's the furthest along and the most likely to work are the last couple of revisions of Ubuntu. You'll need to check with the Linux Mint community to see what the status there is, but don't be too hopeful.
If you change the system's boot mode from UEFI to Legacy - if you can even do that -- you'll find you need to reload Windows. To change from RAID to AHCI, you'll need to alter the boot files for Windows, or Windows will not load.
Windows won’t load and you’ll get a BSOD from switching from UEFI to LEGACY.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
There are many ways to dual boot, and they have there pros and cons like: e.g. do you have more then one HDD?
If you do not have a 2nd HDD you are going to have too shrink your windows partition, and create a 2nd partition for Linux to install on.
Also the new motherboards are using UEFI so it can be tricky to setup with out using a 2nd HDD.
Best thing I can suggest is to use a Virtual machine it allows you to run any operating system in windows. You can install the free VirtualBox or VMware Player, download an ISO file for a Linux distribution such as Ubuntu, and install that Linux distribution inside the virtual machine like you would install it on a standard computer.
Or
Install Ubuntu via Wubi, this method is technically installing Linux, not running Linux software on Windows. You’ll have to reboot each time you want to use your Linux system just as if you had installed it in a standard dual-boot configuration.
However, Wubi doesn’t install Ubuntu in the normal way. Instead, it creates a special file on your Windows partition and uses that file as your Ubuntu drive. This means that you can install Ubuntu and use it without any partitioning and you can uninstall Ubuntu from the Windows Control Panel when you’re done.
Android. And if you want android on your pc Android-x86 project gets you as close as you can get to true Android on your PC. Android-x86 is an open-source project that ports Android to the x86 platform, allowing you to run it on your computer instead of an ARM-based phone or tablet, or you could use Bluestacks
Enjoy but I think using VirtualBox is the best option, also I have used it the most.
Guys, I gave up. I tried many things but it seems that I cannot succeed. I am really disappointed that it requires a lot of hassle to install a simple W10 and Linux dual boot like I did on my all previous laptops.
My personal favorite OS is ParrotOS but your luck might be in that ball park.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
I did post here, how to get around it, but it was marked as spam by someone and admin removed it and it was full of info on how to get around your problem, but anyway I'm sorry to hear you could not do it.
ejn63
12 Elder
•
31711 Posts
•
155872 Points
2056
0
Posted August 2nd, 2020 12:00
There are a number of issues to address:
First, the system likely shipped in RAID mode - - and many (most) Linux distributions won't install natively with the drive controller in RAID mode.
Second, if your system does not have the option of booting in Legacy (CSM Option ROM) -- and it's new enough it may not -- you will need a Linux distribution that fully supports UEFI booting. Few do - the one that's the furthest along and the most likely to work are the last couple of revisions of Ubuntu. You'll need to check with the Linux Mint community to see what the status there is, but don't be too hopeful.
If you change the system's boot mode from UEFI to Legacy - if you can even do that -- you'll find you need to reload Windows. To change from RAID to AHCI, you'll need to alter the boot files for Windows, or Windows will not load.