The code indicates that the intrusion switch has been activated, which means the case is open. If you have reset the switch and are still receiving the message, you should check to see that you have the latest bios update installed.

error code 2000:0415 Check cables

This error typically signifies that a specific cable is not connected or is not seated correctly, and will normally name the specific cable in question.

For Example

ERROR CODE:  2000 - 0415

Validation:  10577

Msg:  Cables - Check the following cables:  LCD Cable

Why are you testing?  What is the actual problem?

http://www.dell.com/support/article/us/en/19/SLN115162/

<ADMIN NOTE: Broken link has been removed from this post by Dell>

Please check the manual, page 8 for the location of your intrusion switch.  You will need to disable it from the BIOS if you've taken the MB out of the case.  

Well, it may be the cable then. Here is information.

Dear All,

The ePSA Error Code : 2000-0415

Validation : 125880

   [Admin NOTE: Service tag removed per TOU policy]  

No other cables connected except, Monitor, KB & Mouse, with PSU.

My Desktop hasn't come with Chassi intrusion switch.

The machine is with the latest A11 BIOS.

Kindly guide, what else can be done on this...?

Thanking you

Regards,

Chidanand B

Dear Sir,

Thank you for your time..

FYI: Intrusion Switch in the BIOS is also disabled.. But still getting the same error as above..

If any thing else can be checked, please let me know..

Thanks again

Hi, please can i have pinout of front I/O cable? I'm using Optiplex 390 mb but with another case. Everything works fine, found power switch, ide led and power led, but bios give me "Alert! Front I/O Cable failure". Just pressing f1 everything work but want to eliminate this. PLEASE !

Thanks

Dario