UNSOLVED

schmenge

updated

20 years ago

S

schmenge

11 Posts

0

10094

March 7th, 2007 18:00

Processor Upgrade

Hi.  I have both a USFF GX240 and a desktop GX150.  I want to be able to install a CD/DVD burner, which kind of rules out the USFF GX240.  Can I install the processor from the GX240 into the GX150 mobo with no problems?  If so, are there any jumpers, etc. I have to change?
 
Thanks.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    175

    0

    Posted March 7th, 2007 18:00

    No. The GX240 uses a P4. The 150 uses a P3. Not interchangeable; the CPUs won't even fit each other's sockets.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    175

    0

    Posted March 7th, 2007 23:00

    No way. The ultra small GX260 board will not fit any other chassis than the one it shipped with. As I recall, the ultra-small GX260 uses a notebook style optical drive; you should be able to install a slimline DVD writer designed for a notebook computer into it.

    Message Edited by ejn63 on 03-07-2007 08:36 PM
  • schmenge

    11 Posts

    175

    0

    Posted March 7th, 2007 23:00

    Thanks.  How about swapping the GX240 mobo into the GX150?  Will the 150 power supply handle the load?  This system will only be used to burn CD's/DVD's; no internet, no gaming.
     
    Thanks again.
  • schmenge

    11 Posts

    175

    0

    Posted March 8th, 2007 12:00

    You are correct about the slimline drives, but they tend to cost far more than regular devices.  Thanks for the prompt replies.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    175

    0

    Posted March 8th, 2007 13:00

    The other alternative, though it's probably a wash price-wise, is an external writer.
  • schmenge

    11 Posts

    175

    0

    Posted March 8th, 2007 17:00

    Okay, truth time.  I actually own both GX units I mentioned, but a friend owns a GX150 that he wants to upgrade.  It already has an internal burner that he wants to use in the GX240.  I've seen one clown run an internal IDE drive by passing the power and control cables through a slot on the backplane, and I actually suggested that to my buddy for his burner.  I can't see it doing any harm to either the burner or the computer.  But he's a tad , and insists that it has to be internal.
    Thanks again for the advice/input.