UNSOLVED

charrog

updated

22 years ago

C

charrog

17 Posts

0

9202

December 17th, 2004 01:00

SB Audigy 2ZS

Okay I am new here first time Dell buyer just bought the XP-4 with the audigy 2zs sound card  was wondering why no sound when I enable the digital output only is there something missing also does the digital output work for all inputs internet radio cd/dvd mp3's etc or is it limited thanks
Roger
  • doods79

    12 Posts

    526

    0

    Posted December 17th, 2004 03:00

    Hi! Just wondering if you already have the speakers connected to the Digital Output port?
  • fireberd

    11 Legend

    33398 Posts

    112846 Points

    526

    0

    Posted December 17th, 2004 09:00

    The "output" will "output" whatever input signal there is. e.g. if you play CD's the CD audio will be sent to whatever speakers.  Except for something that generates surround sound (e.g. 5.1 sound) the type of speaker system you have is not an issue.

    However, do you have "digital" speakers?  If you have "analog" speakers you must use the Analog speaker connection(s) and set the output for analog.  If you set the output to "digital" then you must have speakers that accept a digital input signal.

    If you have "digital" speakers, double check all of your speaker connections.  If you bought "digital" speakers from Dell there should have been a connection sheet on how to hook them up.  If you have "digital" speakers from a previous non-Dell system or from Retail speakers make sure they are compatible and hooked up correctly.

    You didn't include the Make/Model of speakers so no one can offer you specific advice based on the speakers you have.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • charrog

    17 Posts

    526

    0

    Posted December 17th, 2004 17:00

    Also currently have the pink output plugged into the pink input should it be plugged into a different one?

     

  • charrog

    17 Posts

    526

    0

    Posted December 17th, 2004 17:00

    OK did not think it mattered with speakers just assumed that they would play whatever type of sound thru them I have Altec Lansing 2.1 model ATP3 system with subwoofer it has one input. Seems like the speakers may not be compatible but shouldnt the headphones play in digital?
  • charrog

    17 Posts

    526

    0

    Posted December 17th, 2004 18:00

    Ok just looked at configuration looks like it won't work so just ordered the Dell 5.1 surround the 100 watt deal is this a good one?
  • charrog

    17 Posts

    526

    0

    Posted December 17th, 2004 19:00

    Ok so new speakers are on order was wondering will the center speaker mount on my 17" Dell lcd monitor it is the DELL - UltraSharp 1704FPV 17-inch Flat Panel LCD Monitor with Height Adjustable Stand like it does on the wide ultrasharp?
     
  • Arnold Day

    186 Posts

    526

    0

    Posted December 19th, 2004 15:00

    Also currently have the pink output plugged into the pink input should it be plugged into a different one?
    ~~~~~~~~~~~~~~~~~~~~~~~~~





    Hmmm..........the pink jack is usually for the mic. The green one is for speakers.
  • charrog

    17 Posts

    526

    0

    Posted December 20th, 2004 00:00

    That is normally the case but I have a switch that I got from Radio Shack that allows me to switch between headphones and speakers and the output is pink for some reason...
  • charrog

    17 Posts

    526

    0

    Posted December 22nd, 2004 21:00

    Ok have speakers hooked up but no digital output have them hooked up according to the instruction manual went in to the settings and changed from analog to digital while playing music but no digital output what I am I missing. Tryed to run configuration manager for the Audigy 2ZS sound card but in digital there is no output is there any other settings I am missing or something else that was supposed to hook up.

    Thanks Roger