UNSOLVED

xting

updated

22 years ago

X

xting

1 Message

0

42100

November 23rd, 2004 08:00

thermal failure

i was trying to reinstall my optiplex gx1 by using an image on a cd. but every time i was formatting the hard-disk i got an alert that there was an thermal failure.
 
the first thing i did was checking all the cabels, but they where all in place. olso my cpu-fan was working properly.
 
can somebody please help me?
 
 
  • MikesHere

    125 Posts

    4182

    0

    Posted November 25th, 2004 05:00

    Clear the BIOS event log at the bottom of the BIOS page. If no go, flash the BIOS. If no go. Reseat the Processor. Also check the power supply fan and clean al the dust out.
    Mike
  • 4182

    0

    Posted November 25th, 2004 20:00

    Are you saying that after being booted to windoze a thermal failure message is coming up?  Or is it the "Alert - thermal failure" bios message which appears BEFORE you get to windows?  What hardware changes have you made recently?  What model GX1 - SFF, or larger?
  • renea210

    2 Posts

    4182

    0

    Posted October 8th, 2011 16:00

    i dont know about him but i am having the same issue now  and it is b4 i get to windows and when i try to start it up it just shuts down and wont boot up all the way

  • shesagordie

    12 Elder

    46017 Posts

    4182

    0

    Posted October 8th, 2011 17:00

    i dont know about him but i am having the same issue now  and it is b4 i get to windows and when i try to start it up it just shuts down and wont boot up all the way

     
    renea210
     
    What is the computer model?
     
    Bev.
     
  • speedstep

    11 Legend

    46969 Posts

    4182

    0

    Posted October 8th, 2011 17:00

    Thermal failure means the cpu fan is not working and the cpu is overheating.

  • speedstep

    11 Legend

    46969 Posts

    4182

    0

    Posted October 8th, 2011 17:00

    He has an optiplex GX1

    The CPU Fan is not working.

    proc01.gif (27344 bytes)
    1 Microprocessor fan
    2 Guide bracket assembly
    3 Guide bracket assembly latch
    4 Microprocessor/heat sink assembly

    http://support.dell.com/support/edocs/systems/ban_gx1/

    Dell™ OptiPlex™ GX1 Systems

    Specifications
    Jumpers
    Controls and Indicators
    Tech Notes
    Graphics
    Documentation


    Dell™ OptiPlex™ GX1 Systems


    Dell OptiPlex GX1 Small-Form-Factor System User's Guide (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (839 KB)
    Dell OptiPlex GX1 Small-Form-Factor System Service Manual (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (1010 KB)
    Dell OptiPlex GX1 Low-Profile Managed PC Systems Reference and Installation Guide (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (542 KB)
    Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems Reference and Installation Guide (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (566 KB)
    Dell OptiPlex GX1 and GX1p Mini Tower Managed PC Systems Reference and Installation Guide (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (622 KB)
    Diagnostics and Troubleshooting Guide (.htm) view_en.gif (1089 bytes) down_en.gif (1167 bytes) (229 KB)


  • shesagordie

    12 Elder

    46017 Posts

    4182

    0

    Posted October 9th, 2011 12:00

    optiplex GX270 dell

    The GX270 comes in three different versions, the Small Form-Factor, Small Desktop and Small Mini-Tower models.

    See HERE

    Which version do you have?

    Have checked that inside of the case, fans and heatsink cooling fins and the air intakes in the front panel have no dust buildup recently?

    Also, check that the processor and chipset heatsinks are still firmly attached to the motherboard and the case/processor fans are working.
     
    While the case is open, you could check the motherboard for capacitors with bulging tops or are leaking, the tops should be perfectly flat.

    Bev.
  • renea210

    2 Posts

    4182

    0

    Posted October 9th, 2011 12:00

    optiplex GX270 dell