Announcement Banner
UNSOLVED

Vgers

updated

17 years ago

V

Vgers

2 Posts

0

86851

March 19th, 2010 06:00

Error Code:0123

These 2 days, my laptop always "beep"ing when I turned it on...

I didn't know why..., then I runned diagnostic checks, and the result was:

Error Code 0123

Msg:Error Code 2000-0123

Msg:Memory Integrity Test failed

Address:0_8B47A118h

Actual:FFFFFFFFh

Expected:FFFFFDFFh

Location:DIMM_A

 

What should I do??

  • Kymanis

    10 Posts

    719

    0

    Posted March 19th, 2010 07:00

    Error code 2000-0123 indicates that there is a problem with your RAM.

    If you have more then one stick you could try taking one out and just running off one stick, and then swapping to the other one if it is is still not working.

  • Vgers

    2 Posts

    719

    0

    Posted March 19th, 2010 07:00

    I'm a beginner in computer skill...

    I don't really know what is RAM..., and how to check it...

    I know that I have 4 GB RAM, but I don't understand how to check whether I have more than 1...=?

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    719

    0

    Posted March 19th, 2010 09:00

    No one's going to be able to offer much help unless you indicate the model name and number of your system. 

     

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    719

    0

    Posted February 19th, 2012 08:00

    Remove and reinstall both memory modules.  Re-test.  If the error occurs again, swap the two modules.  If the error follows the module, the module is bad.  Replace it with a new one.  If the error follows the socket, not the module, it's the mainboard that's bad.  It will need to be replaced.

  • Jeromerm

    1 Message

    719

    0

    Posted February 19th, 2012 08:00

    The same problem is happening to my PC Error Code 0123 Msg Error Code 2000-0123.  Is there a solution??????

  • nimely57

    1 Message

    719

    1

    Posted April 17th, 2015 15:00

    I need help for repair

  • DELL-Rishi

    6 Operator

    •

    2035 Posts

    719

    0

    Posted April 18th, 2015 07:00

    Hi nimely57,

    This thread is very old and is locked for editing. Please make a new post with a brief description of the issue and the system model.