UNSOLVED

CasCraven

updated

22 years ago

Closed

C

CasCraven

17 Posts

0

17000

December 15th, 2004 01:00

Palmrest paint solution

Recalling days past, when I had an Inspiron 5000, I had a bit of a problem with rubbing the solid black plastic palmrest area smooth within a year of getting it (~Dec 2000). And I wondered how long the paint on my shiny i8600 would hold up - esp. if I accidentally used it while wearing my watch! Fortunately my solution to this past problem carried over well and has saved the paint my new lappy considerable abuse.

Many internet sites and some larger electronics and office supply vendors sell adhesive screen protectors for PDA devices. Since fine variations in texture and clarity are a non-issue, pick a cheap variety and cut a few to fit over the plastic regions. Presto - no scratches for you!

I nabbed a pack of twenty or so designed for a discontinued Viewsonic brand PDA, and fit two per side over the plastic. Not really noticeable appearance-wise, won't damage the paint (this has been my experience, likely because they have to leave a screen unharmed), and they do a great job of protecting the palmrests from scratches and paint rub-through.

-Cas
  • Akash84

    36 Posts

    450

    0

    Posted December 15th, 2004 09:00

    good to know... at the moment i still have the dell stuff on it... its like a plastic piece that covers everything but the keyboard and touchpad... its on the top lid as well and all the lids at the bottom of the laptop
    if that comes off then maybe your solutuion may be the trick