
UNSOLVED
Problem installing resource cd.....
I did a clean windows vista install and that went fine. When I put my dell resource cd in to reinstall all my drivers I get the error : A device attached to the system is not functioning. Any advice is appreciated, I am very frustrated,
Responses (5)
Solutions (0)
That didnt work. I did reboot using the disk and i formatted the hard drives. I will try to send a screen shot but the exact wording of the error is : "there was an error launching the resourcecd setup program:
A device attached to the system is not functioning.
Please ensure you are running this program from the dell resourcecd"
I appreciate your help. Also it is a dell studio 1735
DELL-Vishal Sa
1 Rookie
•
155 Posts
384
0
Posted September 12th, 2012 06:00
Hi
Thanks for the response. It's good to know that your issue got fixed and you are in the process of reinstalling the drivers. You may find this link helpful for information on how to download and install drivers in the correct Order:
Glad to assist you.
Thanks & Regards
Vishal S
#iworkfordell

DELL-Vishal Sa
1 Rookie
•
155 Posts
384
0
Posted September 10th, 2012 04:00
Hi
I would suggest you to try the following steps:
1. Unplug any external peripheral connected to the system
2. Unplug the AC adaptor and Battery
3. Press and hold the power button for atleast 20 seconds
4. Connect the AC adaptor, battery and reboot the system
Try installing the resource CD and check if you get an error this time. Also, if possible, please send me a screenshot of the error message.
I do have a question, did you reinstall Vista by booting the system with the installation disc? Or you followed the screen instructions after inserting the disc in the drive?
Thanks & Regards
Vishal S
#iworkfordell