Solved!
Go to SolutionV
vairamuthusky
3 Posts
0
10478
June 4th, 2012 12:00
USB 3.0 Doesn't work properly
My laptop is Inspiron N5110 Core i3 processor and USB3.0 Port is Texas Instrument Host Controller.
I already install all driver include Wistron-Driver(R309746)
But in Device manger->Universal Bus Controllers->Texas USB3.0 Host Controller are doesn't found.
I'm also try to reinstall, but Driver doesn't install.
Please Help me to solve this Problem,
Thank you,
Regards,
Vairamuthu
DELL-Aniket K
15 Posts
357
0
Posted June 4th, 2012 13:00
Hi Vairamuthusky
Welcome to Dell Community
Please follow the following steps to get the issue resolved :
Kindly, install the four drivers under the Chipset category from the link below:
Kindly reply with the result. Glad to help
Aniket_Kuthiala
Social Outreach Professional
You can reach us at http://en.community.dell.com/
vairamuthusky
3 Posts
357
0
Posted June 4th, 2012 23:00
First of fall Thank you for your response.
Your links go to dell.com, No drivers found for this link.
vairamuthusky
3 Posts
357
1
Posted June 6th, 2012 11:00
Yes i'm still i will cover my warranty for replace USB Board
Thank you...
CarrieSobers
10 Posts
357
1
Posted June 6th, 2012 04:00
Hi
Read the NOTE first.
You need to download this driver from www.dell.com/.../19 go for chipset driver and download/ save it in the desktop. To install the driver right click on each driver and choose Run as Administrator. and then follow install procedure. It should work.
Check the battery and adapter has plugged into the computer. Remove all other external devices from the computer. And also close all other programs which is running in the computer. Confirm battery has >15%. While its installing the BIOS driver in the computer it will automatically restarts by itself and will produce sound in the computer. sort of beep sound. That's normal act for this installation.
NOTE: Install the BIOS from the same website www.dell.com/.../19 .... and then try install the chipset drivers. If you get problem while you installing the drivers for the chipset, then i would say its problem with specific USB port were not detected by this computer. Still if you have problem in installing the chipset driver error then go for USB board replacement.
Thanks
Carrie-Dell