UNSOLVED

m29

updated

18 years ago

Closed

M

m29

5 Posts

0

31012

June 9th, 2008 14:00

wireless driver for Latitude C400

Hi,

 

I have formatted my C400 and now I can't install the Wireless driver. I have no idea what driver should I use, I have the basic C400, no external cards or alike.

 

I have seen a similar thread which was answered by a link to the right driver. I tried it - didn't work for me. It said it couldn't find amatching devince in the directory that should contain the driver (the unzip result).

 

The guy that gave the link said he hopes that after the format only the chips driver were installed and not other device drivers. Can this be the problem ? How can I carry on from there ? My System device drivers screen shows 2 unidentified components - 1 Network Adapter and 1 PCI modem. My guess is that the Network adapter is the one I need to take care of . How ?

 

Thanks,

Doron.

  • AussieChris

    4152 Posts

    547

    0

    Posted June 10th, 2008 06:00

    Hi,

     

    The wirelss card is under the KBD, you may need to look at it to see what it is. Have a look at all the Dell drivers for your model, it may not have come with the machine which is why you may need to look. If you dont have the driver CD, there may be other drivers you will need to install.

     

                                                                    Regards Chris

  • m29

    5 Posts

    547

    0

    Posted June 10th, 2008 10:00

    By KBD, you mean Keyboard I assume.

     

    Ok, I will look , hope it will help.

     

    Thanks anyway.

  • m29

    5 Posts

    547

    0

    Posted June 11th, 2008 14:00

    I have looked under the KBD. It says PCT2304WT. But this is a dial modem isn't it ?

     

    Is this the component that is responsible for the wireless connection ?, seems odd to me.

     

    I have never used this modem since I have this computer. Always direct LAN connection.

     

    Is this what I shoudl update or should I look for something else ?

  • AussieChris

    4152 Posts

    547

    0

    Posted June 12th, 2008 07:00

    Hi,

     

    The wireless is around 50 x 60mm. The modem is half the size and held in with 2 screws. The wireless will have 2 co-axial cables going to it. Look for a brand and model, and see if you can find drivers. it may not be Dell supplied.

     

                                                                        Regards Chris

  • m29

    5 Posts

    547

    0

    Posted June 12th, 2008 18:00

    Thanks for your help.

     

    I wish I could take a picture of the computer because I can't find what you're asking for.

     

    I will try to describe what I do see and this way you might be able to pin point me to what I need to find.

     

    If I turn the laptop upside down, keyboard facing me, the closest thing to me is the battery.

    Next, above the battery is a large rectangle with 2 screws. I removed the screws and opened to rectangle cover and found the modem. However, this is the dial up modem. I did find the right driver for it. So now I have only one unidentified component in the device manager. "Network Adapter". Although the other 3Com network adapter is listed right.

     

    Anyway, going forward on detailing the back of the lap top, there are no additional covers I can see. There are 2 labels to the side of the big rectagle I described before.

     

    the one details:

    DELL c400

    Model PP03L

    ref number ...

    IC Class ...

    then all kinds of symbols, Made in China, Dell LBL P/N .... that's it.

     

    The other label:

    PCTell PCT2304WT modem (which is the one I found under the rectangle).

    ANATEL, argentina and again Dell LBL p/N ....

     

    Regarding coexial cables ..... I can't see any.

     

    Maybe I need to install a wireless software ??? Cause I can't see any now ...

  • AussieChris

    4152 Posts

    547

    0

    Posted June 15th, 2008 21:00

    Hi,

     

    By under the KBD, that is what I mean. You have to lift / remove the KBD. From " support tolls " lower left, you should be able to find a manual and the drivers. The first thing I would try, is make a Folder with all the wireless drivers your model came with and see if Windows will find the right one. Then you can find out what it is in Device manager for next time. If no luck, have a look at it and look for Brand model p / n and then you should be able to find the right driver.

     

                                                                    Regards Chris
     

  • m29

    5 Posts

    547

    0

    Posted June 17th, 2008 18:00

    well Chris,

     

    It took time but I got the basta.... :-)

     

    Intel PRO/Wireless 2200BG. I had to remove the keyboard and I would never ever have thought about it without your help.

     

    thank you for your kindness and patience.

     

    I'll sure keep a list of the drivers now ... :-)

     

    thanks again.

    Doron.