So what's the deal with A03?

felipe_s appears to be located in Europe, they could have different revisions there.
See this post, two of his monitors were manufactured in the Czech Republic: http://forums.us.dell.com/supportforums/board/message?board.id=dim_monitor&message.id=63689#M63689

It would make sense from logistical point of view that from Mexico to usa and from Czech to EU.

Anyone mailed to Dell about this?

Did the A03 guy use some other than desktop mode? It would be incredibly stupid move from dell to unfix banding.

All,

I have not received any notice of a A03.

I suppose they might very well be using different revisions for the EU market, but then, the Chinese built monitors are sold both in the US and over here.(?)
With that in mind, of course I was refering to the Desktop mode, as this is the one that we're being told should be free from banding.(and mine is not)

http://philsamhaber.com/files/P1011356_b.jpg

Cheers
Phil

Thanks for posting the pic. I'm sure many 2007WFP owners will be wondering what this means.

edit: OK, now we have a 2407WFP rev A03: A03 for the Dell Ultrasharp 2407WFP is out

Message Edited by gpro on 08-23-200608:40 AM

LOL. That sticker looks so dodge (not saying A03 or your monitor is dodge or anything). My A02 sticker is much smaller.

Regarding the sticker, usually its part of the sticker with the serial number. If it is an A03, they must have made the change after that part was produced. Though considering I have an A02 and it works well as far as I can tell, I'm wondering what they changed.

ChrisM

Any doubts about the A03 revision existing for the 2407wfp can be put to rest thanks to dctokyo. Here are the pics of his 2407wfp A03.

http://img178.imageshack.us/img178/4192/0608250044ew6.jpg

http://img246.imageshack.us/img246/4081/0608250043cs8.jpg

MANY of us 2407wfp owners are anxious to see what this revision addresses and see if it fixes the numerous outstanding problems the A02 made progress on, but still are not fixed.

1.Can you get us a list of fixes for the A03?

2. For those of us with A02 "still" experiencing problems (as pointed out in other threads) can you facilitate a return for a A03 or at the very least allow us to send in our A02's for a flash upgrade?

Thank you for the feedback!