Solved!
Go to SolutionB
BrianAbbott
2 Posts
0
67409
February 12th, 2016 02:00
UP2716D, KVM feature help
Hi
Just received my new UP2716D, which is working fine. However, I can find no information (either in the manuals or online) on how to set up and use the KVM feature that this monitor has. Help!
Brian
14202
0
Posted September 23rd, 2016 12:00
Does the UP2716D KVM feature support audio switching? Or only mouse/keyboard?
14202
0
Posted September 23rd, 2016 16:00
The two channel audio line-out port is controlled by the video input source selected (HDMI, DP, or mDP) and the OSD- Audio source, not the KVM.
DELL-Chris M (old account)
#IWork4Dell
13605
0
Posted April 4th, 2018 15:00
Is there a hotkey to switch between video inputs instead of using the OSD to swap inputs? I'm currently using the Dell UP2718Q monitor. Hopefully its similar to the UP2716D as far as KVM functionality goes.
13580
0
Posted April 5th, 2018 07:00
UP2718Q =
Button to change Input Source. Also in the Menu
USB Selection USB 1 = DP
USB Selection USB 2 = HDMI 1UP2716D =
Button to change Input Source. Also in the Menu
USB Selection USB 1 = DP
USB Selection USB 2 = HDMI/MHL 1
DELL-Chris M (old account)
#IWork4Dell 13571
0
Posted April 5th, 2018 12:00
Thanks Chris for the quick response. I was wondering if there is a quicker solution to switch between computers for video rather than using the OSD. iogear kvms have a 1 button switch over.
Thanks again.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
14202
1
Posted February 13th, 2016 19:00
The built in KVM is done via the Input Source selection you choose. Page 37 in the User's Guide.
Open page 29 =
* Connect the keyboard and mouse to the UP2716D bottom USB downstream USB ports (Port #8 in picture on page 9)
* Connect computer 1 to UP2716D bottom USB upstream port 1 (Port #7a in picture on page 9)
* Connect computer 1 to one of the UP2716D video in ports (HDMI/HDMI/DP/mDP)
* Connect computer 2 to UP2716D bottom USB upstream port 2 (Port #7b in picture on page 9)
* Connect computer 2 to one of the UP2716D video in ports (HDMI/HDMI/DP/mDP)
* Press the #4 Menu button to open the OSD (On Screen Display)
* Go to Input Source. Choose the applicable port for computer 1 or computer 2
DELL-Chris M (old account)
#IWork4Dell