The error you are receiving is that something on the client machine is closing the socket on the client.
An established connection was aborted by the software in your host machine
Likely candidates for this are firewalls, anti-virus software and occassionally an overly aggressive network switch.
So check that the clients are allowing the NetWorker client to establish network connections. The other thing to consider is the use of the TCP keepalive if you have firewalls or aggressive switches in your environment.
Phani17
3 Posts
822
1
Posted February 21st, 2011 07:00
could be below issues
1) Network is droping at somepoint during the backup. Set group inactivity timeout to zero and try backup again.
2) Check Nic card settings weater it is set to auto or fixed. Try to change it to full duplex or Auto
3) Check powerlink for KB articles esg71983, esg117418