UNSOLVED

AlexDerBasser

updated

17 years ago

0

1115

October 13th, 2009 23:00

Tape Migration

Hello,

we've got plenty of old Tapes in our Library that have to be removed and replaced with new LTO4 Tapes. How do I create an exact copy of an tape so i can recycle the old ones? Does a clone of such a tape behave in the same way the original would or is there a different way to get an exact copy of a certain tape?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    585

    1

    Posted October 14th, 2009 06:00

    If you clone it you will get data onto LTO4, but bare in mind that LTO4 will have higher capacity thus you will be able to put 2 or more old volumes onto new LTO4 volume.
  • cfaller

    96 Posts

    585

    0

    Posted October 18th, 2009 18:00

    but a straight Clone will go 1:1, so be able to populate the new LTO4 media, the cloning will need to be done at the saveset level..
  • 585

    0

    Posted October 18th, 2009 23:00

    So that means a volume clone can only be done on the same type of media and a saveset clone is possible on different types of media?

    When I try to restore from a cloned tape does NetWorker User List all tapes (original tapes and cloned tapes) in the "Required Volumes" View?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    585

    1

    Posted October 19th, 2009 07:00

    So that means a volume clone can only be done on the
    same type of media and a saveset clone is possible on
    different types of media?

    Nope. You can do volume clone on different media types.

    When I try to restore from a cloned tape does
    NetWorker User List all tapes (original tapes and
    cloned tapes) in the "Required Volumes" View?

    No., it does not.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    585

    0

    Posted October 19th, 2009 07:00

    but a straight Clone will go 1:1, so be able to
    populate the new LTO4 media, the cloning will need to
    be done at the saveset level..

    ? I can do volume cloning of volume Alto1 to Alto4.. then I do Blto1 which will also use the space on Alto4... or are you suggesting that it will use Blto4?
  • 585

    0

    Posted October 27th, 2009 00:00

    I tried Volume-Cloning yesterday. Right-Clicking the volume to clone and selected cloning. The following problems occurred:
    - All savesets on the clone were marked "aborted".
    - Networker labeled an additional volume to the clone pool. (Save Set cloning?)

    Does a volume-cloning automatically become a save-set-cloning when savesets on the volume to clone are not entirely present on a single volume? How can I avoid this?

    Is it somehow also possible to get a copy of a tape with the "dd"-command on unix?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    585

    0

    Posted October 27th, 2009 09:00

    Everything in NW is ssid cloning. Volume cloning since 7.4.x or 7.3.x works in way that only ssids on source volume that have head there will be cloned. So, if you have ssid which is tail on that tape, it won't be picked up for example.

    You can do copy of tape with dd, but NW won't be aware of that so that's not approach you should be after.

    What I do not understand is why all tour ssids on clone were marked as aborted; are you sure something else didn't went wrong there?
  • 585

    0

    Posted November 5th, 2009 07:00

    I tried cloning a volume again and this time it worked.
    I realized that all save sets on the volume I direct the cloning to are as long "aborted", as thyre not completely written on that volume. That is why all savesets on my former Cloning were in that state. They just werent finished.

    The performance was average. The cloning took about 110 min. for a total amount of 450 GB which is about 60 MB/s (LTO4-Drives and Tapes).

    How can I boost the speed of the Cloning?
    Is cloning handled inbound between the drives or is all data first sent to the cloning storage node?

    Thanks in advance.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    585

    0

    Posted November 5th, 2009 08:00

    Speed of cloning depends on how much your data is multiplexed at the source. After that some HW restrictions come into the play.