
Solved!
Go to SolutionW
wade_huang
5 Posts
0
3189
December 8th, 2014 00:00
VADP SAN Transport mode Failed
Full level backups using the 'SAN' transport mode fails. Incremental backup works.
Error messages log:
suppressed 2196 bytes of output.
Performing a FULL Image level backup.
Creating a quiesced snapshot for 'PROD-InCodeReview'.
11/19/14 15:03:21.669265 Creating snapshot for 'vm-37' ...
11/19/14 15:03:21.731665 Task is -1% complete
11/19/14 15:03:21.747265 Task is 10% complete
11/19/14 15:03:22.745672 Task is 20% complete
11/19/14 15:03:23.744078 Task is 30% complete
11/19/14 15:03:24.742484 Task is 40% complete
11/19/14 15:03:25.740891 Task is 50% complete
11/19/14 15:03:26.754897 Task is 60% complete
11/19/14 15:03:27.753304 Task is 70% complete
11/19/14 15:03:28.611309 Task is -1% complete
The snapshot was created successfully for VM 'PROD-InCodeReview'.
Downloading VM configuration for PROD-InCodeReview.
Configuration downloaded successfully for VM 'PROD-InCodeReview'.
Following are the details of the client PROD-InCodeReview:
VirtualCenter : 172.16.9.1
ESX Server : tpvm56.fglife.com.tw
DataCenter Name : FGLIFE
ConfigDatastore Name : V7000_6TB
Resourcepool Name : /
Following is the disk information of the client PROD-InCodeReview:
Disk 1 Label : Hard disk 1
Disk 1 Size : 50.0 GB
Disk 1 Datastore name : V7000_6TB
Total Number of Disks : 1
Obtained the virtual disks for the VM.
Change block tracking is disabled for VM: PROD-InCodeReview
File level Recovery from Image level backup is enabled.
MORef for the VM is obtained.
Obtained the virtual disks for the VM.
83510:nsrvadp_save: Requested transport modes "san" unavailable, only "nbd" available. Please change transport mode to "nbd" and retry backup.
90258:nsrvadp_save: The requested transport modes 'san' is unavailable. Exiting.
Cleaningup VADP mount operation.
11/19/14 15:03:35.334952 Deleting snapshot for 'snapshot-424' ...
11/19/14 15:03:35.366153 Task is -1% complete
11/19/14 15:03:35.849756 Task is 50% complete
11/19/14 15:03:36.052557 Task is 100% complete
11/19/14 15:03:36.411359 Task is -1% complete
Snapshot for VM PROD-InCodeReview is deleted.
Temporary directory 'D:\mnt\PROD-InCodeReview' for VADP deleted.
PROD-InCodeReview:*FULL*: retried 1 times.
Temporary workaround:
VADP_Disable_FLR=yes
but..I need to file level restore!!
Responses (7)
Solutions (0)
wade_huang
5 Posts
1753
0
Posted December 8th, 2014 05:00
Hi Prajith,
This is all clients,Networker 8.1.1.8..
Reply wade_huang
5 Posts
1753
0
Posted December 8th, 2014 06:00
Dear Prajith,
This KB I have tested, but did not seem to play a role.
This is case need to reboot after , successful installation???
Reply Castromotorbox
2 Intern
•
217 Posts
1753
1
Posted December 9th, 2014 02:00
Hi,
we get the same issue in the past. Upgrading the VADP Proxy from 8.1.1.4 to 8.1.1.6 solved our issue.
Did you get the same Networker version on Proxy, vcenter and Networker Server?
Hope it will help you
Cheers
Greg
Reply Castromotorbox
2 Intern
•
217 Posts
1753
0
Posted December 9th, 2014 05:00
Hello,
i don't know if it's a networker bug or if re-install the proxy was the solution...
Cheers
Greg
Reply wade_huang
5 Posts
1753
0
Posted December 9th, 2014 05:00
Hi Gregoire,
NetWorker Server & VADP Proxy Server :NetWorker ver:8.1.1.8
This is NetWorker Bug??
Reply

nmc2
268 Posts
1753
0
Posted December 8th, 2014 06:00
Found similar issue with 8.1 version. Look at this kb article, see if it helps.
https://support.emc.com/kb/185186