Solved!
Go to SolutionConnect 3rd N3048 switch into existing stack
hello,
I have one stack ( 2 x N3048 ) . This stack is connected to another stack ( 2 x Force 10 S3048-ON )
Now, I need to buy and connect an additional N3048 . It will be connected in the same N3048 stack.
How should I re-cable the uplink between the new ( 3 x N3048 ) stack and Force 10 stack ?
This is how the current cabling look like.
S3048-ON is using all 4 x QSFP ports ( 2 for stacking and 2 for uplink )
1762
0
Posted August 7th, 2018 09:00
Hi,
Page 242 shows the stacking config for 3 switches. https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-n3000-series_user%27s-guide10_en-us.pdf
1745
0
Posted August 8th, 2018 00:00
thanks, but I think I was not clear on my previous message.
The stacking part I understand it , but how should I re-cable the uplink from the new N3048 stack ( 3 x switches ) to existing S3048/force10 stack ( 2 x switches ) .
As you can see from my previous design, currently all QSFP ports from Force 10 , are used.
DELL-Josh Cr
Community Manager
•
9759 Posts
•
44724 Points
1733
0
Posted August 8th, 2018 09:00
You don’t have to have all 3 switches in the stack connect to the S3048, the stacking ports can transfer to one of the other N3048 and use those links.